I ruined three RandM devices when I first started vaping. It was entirely my fault.
Picture this: You unbox a new RandM Vape flavor. You pull the silicone plug, take that first deep draw, and expect a rich fruit flavor. Instead? You get a harsh, dry, burnt taste that makes you cough instantly. It is frustrating. It kills the experience right out of the box.
Your first thought is usually, “Is this a defective unit?” We see this question all the time. But the reality is different. RandM is well-known for its reliable coil technology and consistent flavor delivery. A burnt taste on the first puff is rarely a hardware issue. Almost every time, it happens because of our own habits. Specifically, it happens when we skip the most important step after unboxing: the setup process.
Do not waste your money by ruining a good device. Let us look at what causes these dry hits. I will show you the exact steps to avoid them. A quick adjustment to your routine is all it takes to keep your RandM tasting perfect, giving you that rich flavor from the first puff to the last.
Why Does Your RandM Taste Burnt? (Understanding “Dry Hits”)
To permanently fix the burnt taste, we first need to know where it comes from. In the vaping community, we call this a “dry hit.”
What exactly is a dry hit?
Let us keep it simple. The heating core inside your vape only has two main parts: a metal coil and some cotton. The cotton acts like a sponge. It soaks up the e-liquid. When you take a puff, the metal coil heats up and turns that soaked liquid into vapor.
But what happens if the coil fires before the cotton is fully saturated?
I actually broke open a ruined Tornado 7000 to find out. I took the burnt device apart after a terrible first puff, and the truth was obvious. The cotton right next to the metal coil was black and charred. However, the outer edges of the cotton were still white and dry. The e-liquid never reached the center. The coil just roasted the dry cotton.
That harsh, stinging flavor hitting your throat is literally burning cotton. Worse yet, once the cotton is burned, the damage is permanent. You cannot reverse it.
Now that we know the science, let us look at the two most common situations where this happens with RandM devices.
Scenario 1: The Burnt First Puff (The Unboxing Mistake)
This is the most common beginner mistake. It is also the most frustrating.
To prevent leaking during international shipping, RandM (especially the Tornado series) uses a strict physical seal. The e-liquid tank and the internal cotton are separated in the box. Many users pull out the top silicone plug and take a deep puff.
The liquid has not had time to flow down into the cotton. You fire the battery, you burn the dry cotton, and a brand-new device is instantly dead.
Scenario 2: The Sudden Burnt Taste (The Chain Vaping Problem)
What if your vape worked for days, but suddenly tastes burnt? This is a warning sign about your habits or the device’s remaining lifespan.
The number one cause here is “chain vaping.” This means taking multiple long, deep puffs in a very short time. The cotton needs time to rest and absorb more e-liquid after every puff. If you vape faster than the liquid can flow (the wicking speed), the cotton runs dry. This temporary dry state causes a dry hit.
Additionally, this sudden burnt taste can happen when the e-liquid is actually empty, or when improper charging methods cause the internal battery to overheat.
The “Golden Rules”: How to Prevent Dry Hits Every Day
Now that we understand why dry hits happen, we can avoid them. Following these four core rules will not only stop the burnt taste but also keep every puff of your RandM tasting rich and fresh.
Rule 1: The Setup is Everything (How to Prime)
This is the most important section of this guide. 90% of beginners fail right here. Many local vape shop owners never mention this step when selling you a device. But as someone who learned the hard way, I have to emphasize this:
- The “Golden Waiting Period”: As mentioned, RandM (especially the Tornado series) keeps the e-liquid and the cotton physically separated in the box to prevent leaks. The moment you pull out the top rubber plug or the bottom seal, the liquid just begins to flow down. You must not vape it immediately!
- The Correct Action (Priming): After removing the plug, you must leave the device standing straight up for 5 to 10 minutes before taking your first puff. This is called “priming the coil.” It gives the thick e-liquid enough time to slowly soak into the dry cotton. Do not skip this wait. It is the only way to save your brand-new device from instant ruin.
Rule 2: Break the “Chain Vaping” Habit (Pace Your Puffs)
Many vapers unconsciously take hit after hit while gaming or watching TV. This habit is a silent flavor killer.
- Let the cotton breathe: When you chain vape, the metal coil stays hot, but the e-liquid cannot flow fast enough to replace what you just vaporized. After a few fast puffs, the cotton runs dry, and a burnt taste is guaranteed.
- The ideal pace: Learn to control your rhythm. Take 3 to 5 puffs, then pause for 10 to 15 seconds. That short break is all the cotton needs to absorb more liquid and prepare for the next perfect puff.
- Vaping gently: Do not inhale aggressively like you are sucking liquid through a blocked straw! Vaping does not require lung power. A smooth, steady draw prevents dry hits and produces a much better flavor.
Rule 3: Stop Charging It Wrong (The Hidden Cause)
You might not expect this, but bad charging habits directly cause a burnt taste.
- Never vape while charging: The battery gets warm when plugged in. If you use the device at the same time, the internal heat spikes. This bakes the e-liquid too fast, dries out the cotton, and gives you a harsh hit.
- Do not overcharge: Most modern RandM devices with a Type-C port only need 30 to 45 minutes to fully charge. Never leave it plugged in overnight! Overcharging damages the battery output, causing the coil to heat unevenly and ruin the flavor.
- Choose the right charger: Stay away from high-power phone chargers. I used a 20W fast charger out of convenience and permanently burned two devices. High currents cause massive heat spikes. Stick to a standard 1A/5V slow charging cable, or do what I do: just plug it directly into your computer’s USB port. It safely extends the life of your vape.
Rule 4: Stand It Up (Proper Storage)
How you store your device when you are not using it matters a lot.
- Keep it upright: Always stand your RandM straight up on a table. Gravity pulls the e-liquid down, keeping the cotton core soaked. If you leave it lying flat or upside down for hours, one side of the cotton will dry out.
- Avoid extreme temperatures: Never leave your vape in a hot car during summer. Heat makes the e-liquid as thin as water, causing terrible leaks. In freezing winter weather, the liquid becomes extremely thick and cannot flow into the cotton properly, leading to an instant dry hit. Room temperature is always best.
Diagnosis & Rescue: What If It Already Tastes Burnt?
Even the most careful vapers experience a bad puff sometimes. If you notice a strange, harsh taste, do not throw your device in the trash just yet. You need to play “doctor” first and figure out if your RandM is experiencing a “fake” burnt hit or a “real” one.
How to Tell the Difference: Fake vs. Real
The “Fake” Burnt Hit (A Temporary Warning)
- Symptoms: The flavor suddenly drops. You notice a dry, slightly harsh aftertaste. This almost always happens right after you take too many puffs in a row.
- The Fix: This is not a real burn. The cotton is just temporarily dry. Stop vaping immediately. Stand the device straight up and leave it alone for 20 minutes. Whenever I vape too fast while gaming and get this dry taste, I just stand the vape next to my mousepad and ignore it. Half an hour later, the dry feeling is gone, and the rich flavor is back!
The “Real” Burnt Hit (Permanent Damage)
- Symptoms: You take a puff and get a sharp, overwhelming burnt taste straight to your throat. It might even smell like burnt plastic or charcoal. It makes you cough instantly.
- The Fix: I am sorry, but your device is dead. This means the cotton inside is charred and black. Once this happens, the damage is irreversible. No matter how long you wait or how hard you shake it, that burnt taste will never go away. For the sake of your throat, you have to throw this device away.

The End of the Line: It Is Simply Empty
What if you did everything perfectly? You waited 10 minutes after unboxing, you never chain vape, and you charge it correctly. But suddenly, a burnt taste appears and gets worse with every puff. What is going on?
The answer is simple: you are out of e-liquid.
RandM devices offer a massive puff count, but they do run out eventually. When there is no more liquid for the cotton to absorb, every puff directly burns the dry material. If your specific model has a clear e-liquid tank, look inside. If it is empty or only has a tiny drop left at the bottom, your RandM has successfully done its job. It has reached the end of its life.
It is time to throw it away, grab a brand-new one, and enjoy that perfect flavor all over again!
Making Every Puff as Good as the First
A great vaping experience always comes down to the small details. A RandM device already delivers fantastic flavor production on its own. It just needs a little patience from you to work properly.
Let us quickly review what we covered: wait that vital 10 minutes after unboxing, keep a smooth vaping rhythm, and charge the battery correctly. If you follow these three simple rules, you will eliminate 95% of all flavor problems and never experience a dry hit again.
The next time you open a brand-new RandM and pull that silicone plug, do me a favor. Set a 10-minute timer on your phone right away. Go watch a few short videos. Make a cup of coffee. Just do not vape it yet. This is honestly the most practical advice I can give to any RandM user.
Stop dry hits before they happen by getting that very first puff right. May every vaping you take be smooth, rich, and full of flavor!







